2-Piece Floating Ball Valve
2-Piece Floating Ball Valve is selected for general process isolation where a compact body and straightforward flanged or threaded installation are preferred. A 2-piece floating ball valve uses a body-and-end-piece construction that keeps the valve compact while allowing a wide range of end connections and materials. It is commonly considered for process, utility and terminal service when line size and pressure remain within the practical range of a floating-seat design.
2-Piece Floating Ball Valve for industrial valve projects.
A 2-piece floating ball valve uses a body-and-end-piece construction that keeps the valve compact while allowing a wide range of end connections and materials. It is commonly considered for process, utility and terminal service when line size and pressure remain within the practical range of a floating-seat design.
When to select this design
General process isolation where a compact body and straightforward flanged or threaded installation are preferred.
Choose this design when compact construction matters more than full body disassembly for maintenance.
Typical applications
- Process isolation
- Utility lines
- Tank farms and terminals
- General industrial service
2-Piece Floating Ball Valve: design points to confirm.
This is a specific valve construction. Final size, class, material and seat combinations depend on the approved datasheet and design calculation.
| Body construction | Two-piece body-and-end-piece construction. The compact layout is commonly used for flanged or threaded process valves where full center-body removal is not the main maintenance requirement. |
|---|---|
| Seat & sealing | Soft seats such as PTFE or reinforced PTFE are common for suitable pressure-temperature duties. Seat material must be checked against media, temperature, fire-safe construction and operating torque. |
| End connection | RF flanged or threaded ends are common depending on size and piping class. Confirm flange standard, face-to-face requirement and whether lever or gear operation is required. |
| Engineering focus | Check body joint sealing, seat pressure-temperature capability and stem packing against the actual service. For automated valves, actuator sizing should include break torque and project safety margin. |
| Material selection | Common project materials may include carbon steel or stainless steel bodies with stainless trim. The exact body, ball, stem, seat and seal combination should follow the piping class and corrosion requirements. |
| Testing & inspection | Specify shell and seat testing, fire-safe qualification where required, fugitive-emission requirements and any PMI or NDE required by the project. |
Engineering considerations for 2-Piece Floating Ball Valve.
Construction and maintenance
Two-piece body-and-end-piece construction. The compact layout is commonly used for flanged or threaded process valves where full center-body removal is not the main maintenance requirement.
Seat, sealing and torque
Soft seats such as PTFE or reinforced PTFE are common for suitable pressure-temperature duties. Seat material must be checked against media, temperature, fire-safe construction and operating torque.
Piping and installation
RF flanged or threaded ends are common depending on size and piping class. Confirm flange standard, face-to-face requirement and whether lever or gear operation is required.
What to verify before approving the technical offer.
Engineering risk
Check body joint sealing, seat pressure-temperature capability and stem packing against the actual service. For automated valves, actuator sizing should include break torque and project safety margin.
Materials and traceability
Common project materials may include carbon steel or stainless steel bodies with stainless trim. The exact body, ball, stem, seat and seal combination should follow the piping class and corrosion requirements.
Inspection and testing
Specify shell and seat testing, fire-safe qualification where required, fugitive-emission requirements and any PMI or NDE required by the project.
Send the valve datasheet together with the piping class and project valve, material, testing and coating specifications. Missing design inputs should be clarified rather than assumed.
Other Floating Ball Valves configurations.
Compare related designs by construction, pressure class, temperature range and service conditions.
Choose this design when maintenance access and welded or threaded end options are a priority.
Compare 3-Piece Floating Ball Valve →Choose this design when standard flanged installation and easy line removal are more important than welded-end integrity.
Compare Flanged Floating Ball Valve →Return to the Floating Ball Valves range to compare all configurations.
Back to Floating Ball Valves Range →Continue the technical selection.
Use these pages to check pressure class, material, standard and end-connection requirements against this valve design.
2-Piece Floating Ball Valve FAQ
What is a 2 piece floating ball valve?
A 2-piece floating ball valve uses a body-and-end-piece construction that keeps the valve compact while allowing a wide range of end connections and materials. It is commonly considered for process, utility and terminal service when line size and pressure remain within the practical range of a floating-seat design.
Where is a 2 piece floating ball valve commonly used?
Typical applications include Process isolation, Utility lines, Tank farms and terminals, General industrial service. Final suitability depends on the actual service medium, pressure, temperature and project specification.
What information is needed to quote a 2 piece floating ball valve?
Provide size, quantity, pressure class, body and trim materials, seat material, end connection, design pressure and temperature, media, operation, design standard, fire-safe/emission requirements, testing, coating and documentation scope.
How is a 2 piece floating ball valve different from other floating ball valve designs?
Choose this design when compact construction matters more than full body disassembly for maintenance.
Technical documents for project review.
For technical evaluation, request the applicable product documents and inspection records for the offered valve configuration.
Product Photos
Additional finished-valve, nameplate and component photos are available for the selected valve configuration.
GA Drawing / Datasheet
GA drawings and datasheets are prepared for the selected size, pressure class and valve configuration.
Testing & Inspection Records
Inspection documentation can include pressure testing, dimensional inspection, PMI, NDE/NDT and coating records as required by the project.